Sand filter pump with timer 530 W 10,980 L/h

This sand filter pump with timer is designed to keep the pool clean and free of dirt. The sand filter can filter 10,980 liters per hour and has a durable, corrosion-proof filter tank. It is resistant to the acidic influence of chlorinated pool water. It has a built-in timer, so you can choose the desired operating time (2 hours, 4 hours, 6 hours, 8 hours, 10 hours, 16 hours and 24 hours). The timer has 2 modes: continuous mode and single cycle mode. In continuous mode, the pump will run for the specified number of hours and then stop. You will repeat this program every day. In single cycle mode, the pump will run for the chosen number of hours and then stop. The operating hours can be easily set by pressing the timer button. It also has additional pre-filtering to keep dirt away from the coarse sand filter. The top flange clamp design allows 360 degree rotation for easy installation. This pool filter pump is weather resistant and durable, thanks to the reinforced plastic housing. This set includes a repairable base to offer secure mounting. It is compatible with most removable pools with a 38 mm port. Note: Can be connected to 32mm and 38mm diameter hoses.

• Color: Blue and black
• Plastic material
• Dimensions: 550 x 480 x 740 mm (W x D x H)
• Power supply: 220-240 V~, 50 Hz
• Power: 530W
• Connection diameter: 38mm
• Filter diameter: 38cm (15'')
• Flow rate: 7.5 m³/h (32.8 GPM)
• Maximum height: 11 m
• Maximum pump capacity: 10,980 l/h
• Maximum working pressure: 3.5 bar
• Suitable water temperature: 0-45°C
• With a prefilter
• Integrated timer with 2 operating modes: continuous and single cycle
• The timer can be set in periods of 2 hours, 4 hours, 6 hours, 8 hours, 10 hours, 16 hours, 24 hours
• Requires 19-36 kg of filter sand (not included)
• IP Rating: IPX5
• 7-position valve: Filtration, rinse, recirculate, winter, backwash, closed, dirt
• Suitable for hoses with a diameter of 32 mm or 38 mm
• Suitable for removable pools
• Assembly Required: Yes