DUTCH WALLCOVERINGS Fiberglass wallpaper remover 10 kg

This fiberglass wallpaper remover from DUTCH WALLCOVERINGS is the perfect, ready-to-use solution for easily removing fiberglass wallpaper from walls. You should always try a small piece first. The Re-Move must penetrate the adhesive layer. After 20 minutes, check if the Re-Move has penetrated. If this is the case, the rest can be applied to the surface. If this is not the case, see if the top layer can be stripped. Firstly, remove the top layer separately from the bottom layer. The bottom layer can be removed with Re-Move. If the wallpaper cannot be removed, apply a second layer. If that does not penetrate, the surface should be lightly sanded. Leave it for 20 minutes and let it soak. Pull the track from the top to the bottom of the wall and remove all the wallpaper from the wall. Remove any remaining adhesive from the wall with an iron or putty knife.

• Content: 10 kg
• Ready for use
• For any type of wall
• Suitable for approx. 60 m²
• Lubricate the walls generously
• Duration: 20 minutes
• Removes glass fabric and wallpaper
• Remove any glue residue left behind
• The stucco remains intact
• Fast, efficient and profitable
• Immediately ready to reapply wallpaper