Hand tools

This slide hammer puller with thread adapters is suitable for releasing and removing diesel injectors. A carrying case is included for easy transportation and safe storage.

This specific alternator tool set has special bits for drive pulley installation. The drive pulley is attached by 33-tooth inserts. The set includes all the sleeves and plungers necessary to change the bearing ball joints. The included inserts are suitable for special operations on Bosch and Renault. This alternator tool set contains adapters for VW, Audi, BMW, Mercedes and Ford.

This coil spring compressor set is designed to compress MacPherson springs of most sizes. Allows quick compression of the coil spring to replace the shock absorber or spring assembly. Made from heavy duty steel, the kit is robust and durable, with its forged hooks and hardened center screw ensuring a long life. Tools are delivered in a blow-molded case for easy storage and transportation.

Our 22-piece glow plug set is ideal for removing damaged electrodes. These tools are made of carbon steel for strength and durability. Our tools make the job easier and faster. All parts are delivered in a handy case for easy storage and transportation.

This engine timing tool set for Peugeot and Citroen is a perfect engine timing tool set that makes it easy to repair your car engine. Made of heavy steel, the tools are very robust and durable, so they will serve you for a long time. All parts are delivered in a convenient blow-molded case for easy storage and transportation.

This elastic strap assembly and disassembly set is designed for universal assembly and disassembly of elastic straps. The fitter can easily assemble all the elastic straps, while the dismounter allows you to remove and reuse the elastic straps. The elastic strap mounter and demounter are made of durable plastic, and their vibrant colors make them easy to recognize.

This tool set is easily used to test cooling system pressure and detect water tank leaks with great ease. Made of high quality plastic and aluminum, this tool kit is practical, wear-resistant and not easy to rust. Color-coded radiator test caps are provided, making it easy to identify when choosing the appropriate test cap. This kit is suitable for most domestic and imported vehicles. Additionally, the kit is delivered in a blow-molded box for easy transportation and storage.

Our stainless steel paintless dent repair kit will remove dents and dings on your vehicle without damaging the paint job. Using this tool set will not damage your car like other methods. Dents are removed from the back of the panel, so you won't have to sand, use paint fillers (body filler), or repaint. No panels will need to be replaced or painted, saving you the hassle of mixing the right paint color to match adjacent panels. Paintless dent removal is a delicate process and always requires the best tools, so this set will be a great option. Set includes 21 repair rods, 1 dent lifter, 1

This comprehensive tool set is suitable for a wide range of diesel vehicles, whether for commercial or occasional use. The entire set is designed to clean and decarbonize the injector seats when you change injectors, preventing blowback due to poorly seated injectors as well n.Los The five different cutters are available for almost all diesel cars. They can be used to recut injector seats when overhauling diesel engines or replacing injectors. And they can also help maintain the diesel injector seat so that the new or reconditioned injector is installed correctamente.Todas All tools are made of high quality materials, providing an easy cleaning job. The set includes the s

This 16-piece bearing extractor set can be used to remove pilot bearings, roller bearings, etc. from blind housings. It is particularly suitable for use in cars and commercial vehicles, agricultural equipment, and in the field of mechanical engineering. Made of high quality materials, this tool set is very durable. Tools are delivered in a blow-molded case for easy storage and transportation.

This rod end remover tool is a universal tool designed to remove and install inner tie rods on vehicles. It grabs inner tie rod ends that have no, incomplete or inaccessible wrench-floors. This rod end remover fits Automatically servicing inner tie rod ends with body diameters from 35mm to mm.Tubo Long shaft tube helps keep wrenches from damaging car bodies. Narrow profile allows for easy use in tight spaces.

This wheel hub bearing tool is ideal for the damage-free installation and removal of GEN2 bearing units on all common Audi, Seat, Skoda and Volkswagen vehicles. The real beauty of this kit is that it can be used on site without the need to remove the strut or hub from the culo.Esto This alone will save a lot of time making this tool a must-have for every garage's inventory. These bearings are lightweight with an integral mounting flange. They are also preloaded with a retaining ring that secures the bearing in the carcasa.Todas All tools are neatly presented in their own sturdy case for easy transport.

This extractor tool set is designed to remove harmonic balancers, cranks, shaft pulleys, flywheels and pulleys, gears. The four slots in the yoke allow application using 2 or 3 holes. The center screw is equipped with a floating swivel, which prevents damage to the end of the shaft. Made from forged and heat-treated steel, this tool set is highly durable. The set ships in a blow-molded box for easy storage and transportation.

This 11-piece bolt extractor set is ideal for loosening damaged screws and bolts. This professional tool set is ideal for commercial or occasional use. It is specifically designed to remove damaged or corroded nuts without damaging the bolt thread. Made of high quality steel, this extractor set is strong and durable. Its innovative spiral profile is inserted into the screw head and allows safe release of the drive profile that can no longer be used. The complete screw extraction set is delivered in a sturdy box for easy storage and transportation. Delivery includes 10 bolt extractors and 1 lever.

This engine timing tool set is suitable for use on newer cars with HP (petrol) or HDI (diesel) engines. It is applicable to Peugeot and Citroen models to lock the flywheel/camshaft/crankshaft, disassemble and install the fuel injection pump and water pump, change the timing belt, etc.Todos All sets are supplied in a case Sturdy rigid for storage. Delivery includes flywheel locking pin, camshaft locking bolt, injection pump locking pin, flywheel holding tool, timing belt retaining clip and tensioner adjuster of the timing belt.

This tension gauge is for adjusting the tension of drive belts, where the movement of the timing belt is measured by the load (daN) (1daN=10N). The tool is ideal for belts with different serpentines and thicknesses. Its adjustable dual scale graduations can be read from the front and back of the herramienta.Hecho Made of hardened steel with an easy-travel screw action and a knurled grip edge for the greatest grip and durability.

This wheel hub bearing tool is ideal for damage-free mounting and dismounting of GEN2 bearings - 85mm units on all common vehicles of VW T5, Touareg (with 16" inch wheels/suspension),Transporter, Multivan The real beauty of this kit is that it can be used on site, without the need to remove the strut or hub from the vehicle. This alone will save so much time making this tool a must-have for every garage's inventory.This hub bearing tool. The wheel kit is ideal for the damage-free fitment and removal of GEN2 - 85mm bearings on all common vehicles from VW T5, Touareg (with 16 inch wheels/suspension), Transporter, Multivan. The best thing about this kit is that. can be used on site

This kit is designed to measure the amount of fuel that each injector returns to the rear tank quickly and effectively. This way you can tell if any injector is damaged. This kit allows simultaneous measurement of the pressure of the 6 injectors. There are 24 injector adapters suitable for BOSCH-01, SIEMENS-02, DENSO-03 and DELPHI injectors. This kit also has an anodized hanging bottle rack for the engine bay. A molded case is included for transportation and storage.

This set of diesel injector extractor tools allows for quick and easy removal of diesel injectors. The extractor set is made of high quality steel, guaranteeing excellent durability. All tools are delivered in a sturdy case for easy storage and transportation. Delivery includes 4 adapters, 4 slide hammers, 5 nuts, 2 jaws, 2 extractors, 1 spot welding cutter, 12 screws, 1 removal tool, 4 fixing eyes, 1 rod and 5 sockets.

The 15-Piece Brake Assembly and Maintenance Tool Set provides everything you need to work on drum and disc brakes with ease and effectiveness. These high quality tools are made from durable carbon steel. This complete and well-organized kit is delivered in a compact case that is easy to transport and store.

This camshaft alignment tool is ideal for holding and securing both camshafts at top dead center (TDC) when replacing the timing belt. It is suitable for 2.4L, 2.7L and 2.8L Bi-Turbo engines with 5 valves per cylinder in vehicles such as Audi A4, A6, A8, S4 and VW Passat. The included locking pin is used to lock the crankshaft in the TDC position while changing the timing belt or removing the crankshaft bolt.